File Manager

X7ROOT File Manager

Current Path: /usr/share/doc/iotop

usr / share / doc / iotop /

📁 ..
📄 ChangeLog(28.91 KB)
📄 NEWS(2.11 KB)
📄 README(730 B)
📄 THANKS(1.71 KB)

Editing: ChangeLog

2013-05-27  Guillaume Chazarain <guichaz@gmail.com>

* NEWS: Document signature

2013-05-27  Guillaume Chazarain <guichaz@gmail.com>

* release.sh: GPG sign all released files

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Version bump.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Clean exit also on SIGTERM otherwise the terminal is
	unusable.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Python3 can print UTF-8 to curses, python2 can't so
	let's handle both.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Cleanly exit on SIGINT otherwise python3 will leave
	the terminal in an unusable state.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* .install-rpm.sh: No need to make the RPM install script move bin/
	to sbin/ now that setup.py installs to sbin/.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* setup.py: Make setup.py install the iotop script in sbin/ instead
	of bin/.

2013-05-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: In some setup closing the xterm window only has the
	effect of deleting the pty.  Then iotop would be busy looping
	reading on stdin. Instead we should detect the terminal deletion and
	exit.  When this happens iotop receives (0, 25) as an event, which
	is (stdin, select.POLLIN|select.POLLERR|select.POLLHUP).  Also, represent an empty even list as [] instead of 0, this is just
	cosmetic.

2013-02-04  Paul Wise <pabs3@bonedaddy.net>

* iotop/data.py, iotop/ioprio.py, iotop/ui.py, iotop/vmstat.py: Fix
	the FSF address embedded in a few files

2013-02-04  Paul Wise <pabs3@bonedaddy.net>

* sbin/iotop: Fix python3 compatibility for iotop when installed

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* README, iotop/data.py: Update python requirements

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* NEWS: Also advertise the move to sbin/ as it's significant

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* .install-rpm.sh: The RPM should also install to sbin.

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* bin/iotop, sbin/iotop: Moved to sbin.

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* .install-rpm.sh, MANIFEST.in: Finish man page renaming

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Version bump

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, THANKS: Advertise the newly introduced differentiation
	between total and actual I/O.

2013-02-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: 80 cols

2012-10-10  Igor Bazhitov <ibazhitov@parallels.com>

* iotop.8, iotop/data.py, iotop/ui.py: Add 'Actual' bandwidth stats
	to summary header 'Total' values in the summary header may look confusing to users.
	They represent actual kernel <-> disk I/O bandwidth, while
	individual values for processes/threads show process <-> kernel I/O
	bandwidth.  Rename 'Total' to 'Actual' and add old 'Total' status line that sums
	up all individual process/thread bandwidths. Explain the difference
	between 'Total' and 'Actual' in the manpage.

2012-10-09  Igor Bazhitov <ibazhitov@parallels.com>

* README: Update manpage name in README

2012-12-05  Paul Wise <pabs3@bonedaddy.net>

* iotop/data.py: Fix crash when running under python3.  This reverts cd6ffb5913664844290f44a7ea48533caf8c459e Traceback (most recent call last):   File "./iotop.py", line 12, in <module>     main()   File "./iotop/iotop/ui.py", line 597, in main     main_loop()   File "./iotop/iotop/ui.py", line 587, in <lambda>     main_loop = lambda: run_iotop(options)   File "./iotop/iotop/ui.py", line 485, in run_iotop     return curses.wrapper(run_iotop_window, options)   File "/usr/lib/python3.2/curses/wrapper.py", line 43, in wrapper     return func(stdscr, *args, **kwds)   File "./iotop/iotop/ui.py", line 478, in run_iotop_window     ui.run()   File "./iotop/iotop/ui.py", line 153, in run     total = self.process_list.refresh_processes()   File "./iotop/iotop/data.py", line 459, in refresh_processes     self.processes.items() if   File "./iotop/iotop/data.py", line 460, in <listcomp>     process.update_stats()])   File "./iotop/iotop/data.py", line 358, in update_stats     for tid, thread in self.threads.items(): RuntimeError:
	dictionary changed size during iteration [This is valid since 0fc4ab84c8cbba1fbe83dc71fb89100b87c54898  added the self.threads = dict(...)]

2012-09-02  Paul Wise <pabs3@bonedaddy.net>

* iotop.1, iotop.8, setup.py: Move iotop out of the path for users

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Fix the setting of the I/O priority and advertise it
	a litle more.

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Here we print a string, not bytes.

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/netlink.py: Remove stray print added during the python3
	conversion.

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Restore compatibility with python2

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Put back code deleted in the python3 conversion

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Some missed python3 conversions

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py, iotop/ui.py: Cosmetic fixes

2012-09-02  Paul Wise <pabs3@bonedaddy.net>

* iotop/data.py, iotop/genetlink.py, iotop/ioprio.py,
	iotop/netlink.py, iotop/ui.py: Port to Python 3 Not entirely sure about all parts of this but it works in Python 2/3

2012-09-03  Guillaume Chazarain <guichaz@gmail.com>

* THANKS, iotop/data.py: Show custom thread names.

2012-05-13  Paul Wise <pabs3@bonedaddy.net>

* iotop/ui.py: Improve the message that is printed when Linux denies
	access to taskstats.

2012-03-08  Guillaume Chazarain <guichaz@gmail.com>

* README: Consistent option names

2012-01-22  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Restore the default SIGPIPE handler so that sudo
	./iotop.py -b|head does what's expected.

2012-01-22  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/ui.py: Adapt the display to the maximum pid width

2012-01-18  Guillaume Chazarain <guichaz@gmail.com>

* .gitignore: Ignore the build directory.

2011-10-30  Guillaume Chazarain <guichaz@gmail.com>

* .install-rpm.sh, setup.cfg: Actually install-rpm.sh is still
	needed.

2011-10-30  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Version bump

2011-10-15  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Explain that iotop now requires root.
	https://lkml.org/lkml/2011/10/1/170

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1a51410abe7d0ee4b1d112780f46df87d3621043

2011-09-17  Thomas Guettler <tguettler@tbz-pariv.de>

* iotop/ui.py: Right-justify the header so that numbers stop
	"bouncing".

2011-08-04  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: When printing the time, print it also in the summary

2011-04-10  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py, iotop/genetlink.py, iotop/ioprio.py,
	iotop/netlink.py, iotop/ui.py, iotop/vmstat.py: Address some
	pyflakes and pychecker warnings

2011-03-28  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Version bump

2011-03-14  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Show stats since iotop started, not since 'a' was
	pressed.  This is to avoid losing valuable data when 'a' is
	inadvertently pressed.

2011-03-13  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Force UTF-8 output even if the locale is not set to
	UTF-8.  At worst it will output garbage, which is better than
	crashing in this case.

2011-01-16  Guillaume Chazarain <guichaz@gmail.com>

* THANKS, iotop/data.py, iotop/genetlink.py: Fix netlink message
	parsing to accept alignement padding.  https://lkml.org/lkml/2010/12/13/176
	https://lkml.org/lkml/2010/12/29/237

2010-12-15  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Removing dead code

2010-12-14  Guillaume Chazarain <guichaz@gmail.com>

* NEWS: Grammar

2010-12-14  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Version bump

2010-12-14  Guillaume Chazarain <guichaz@gmail.com>

* MANIFEST.in, install-rpm.sh, setup.cfg: Try to do without
	install-rpm.sh

2010-12-14  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: With addstr instead of insstr we get a harmless
	exception when writing on the last column.  Confirmed by http://ubuntuforums.org/showthread.php?t=457689
	addstr() raises an exception but the string is printed anyway

2010-12-14  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Back to addstr because of:
	http://marc.info/?l=ncurses-bug&m=125233342917443&w=3 insstr (from ncursesw) UTF-8 issue => The cursor position was not
	updated for wide characters by insstr()

2010-09-06  Guillaume Chazarain <guichaz@gmail.com>

* bin/iotop: Revert "Some distributions have a default distutils
	prefix which is not in sys.path, so installed modules cannot be
	imported." This reverts commit d0812c2024a1f8edb081a2996af12efacdf8c961.  Actually I don't think this is needed for now.

2010-09-06  Guillaume Chazarain <guichaz@gmail.com>

* bin/iotop: Some distributions have a default distutils prefix
	which is not in sys.path, so installed modules cannot be imported.
	To address that, explicitely add the path where the module is
	supposed to be installed to sys.path.

2010-09-04  Guillaume Chazarain <guichaz@gmail.com>

* THANKS, iotop/ioprio.py: Support for getting and setting IO
	priority on armel and hppa architectures.

2010-09-04  Guillaume Chazarain <guichaz@gmail.com>

* THANKS, iotop/data.py: Instead of assuming the pid field is 4
	bytes long, take its length from the header.  This is needed for
	http://lkml.org/lkml/2010/2/12/167 [PATCH] delayacct: align to 8
	byte boundary on 64-bit systems

2010-08-22  Paul Wise <pabs3@bonedaddy.net>

* iotop/ui.py: Fix traceback with an invalid locale.  Closes: http://bugs.debian.org/593846

2010-06-27  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, iotop/version.py: Bump version

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* MANIFEST.in: We no longer use setuptools.

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop.1: Document the competition

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Whitespace fixes

2010-05-31  Paul Wise <pabs3@bonedaddy.net>

* README, iotop.1, iotop/data.py: Document the requirement for
	CONFIG_VM_EVENT_COUNTERS and check for it on startup.  Closes: http://bugs.debian.org/574346

2010-03-17  Paul Wise <pabs3@bonedaddy.net>

* iotop/data.py: Do not report requirements that are available.  Closes: http://bugs.debian.org/574246

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* release.sh: Build the source distribution using ./setup.py sdist

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* MANIFEST.in: Make sure to bundle all files in the source
	distribution

2010-06-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop.py, iotop/data.py, iotop/ioprio.py, iotop/ui.py,
	iotop/vmstat.py: Added GPLv2+ headers

2010-04-27  Guillaume Chazarain <guichaz@gmail.com>

* iotop/genetlink.py, iotop/netlink.py: Johannes relicensed
	pynl80211 to GPL version 2 or later.

2010-04-26  Jiri Olsa <jolsa@redhat.com>

* iotop/netlink.py: This broke on ppc64. Let's make U32Attr
	consistent with u32().

2010-01-11  Guillaume Chazarain <guichaz@gmail.com>

* iotop/version.py: Bump the version number

2010-01-11  Guillaume Chazarain <guichaz@gmail.com>

* release.sh, setup.cfg: Bring back the building of RPMs and
	integration of the ChangeLog

2010-01-11  Guillaume Chazarain <guichaz@gmail.com>

* NEWS, install-rpm.sh, setup.cfg, setup.py: Stopped using
	setuptools in favor of straight distutils

2010-01-02  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Negative sizes shouldn't ever happen, but let's
	handle them gracefully anyway.

2009-12-13  Guillaume Chazarain <guichaz@gmail.com>

* : commit b76e492ce5dbdecb198109e1bbc77aad909a0a67 Author:
	Guillaume Chazarain <guichaz@gmail.com> Date:   Sun Dec 13 21:17:56
	2009 +0100

2009-12-13  Guillaume Chazarain <guichaz@gmail.com>

* README, iotop/data.py: Document the new python requirements

2009-12-13  Jiri Olsa <jolsa@redhat.com>

* NEWS, THANKS, iotop/data.py, iotop/netlink.py: Compatibility with
	python2.4 using the ctypes module

2009-12-13  Guillaume Chazarain <guichaz@gmail.com>

* iotop/genetlink.py: 80 columns

2009-12-13  Guillaume Chazarain <guichaz@gmail.com>

* iotop/genetlink.py, iotop/netlink.py: Untabify

2009-12-13  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Don't use all() as it was introduced in python-2.5

2009-11-05  Guillaume Chazarain <guichaz@gmail.com>

* THANKS, iotop/data.py: Fix a crash were iotop could open
	/proc/PID/status but not read it as the process disappeared by then.

2009-09-26  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Default to 0 instead of None

2009-09-22  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: commit d4cab23b1c8c2f91ae7b353087bc60e7659620ef
	broke iotop -o

2009-09-06  Guillaume Chazarain <guichaz@gmail.com>

* : commit b8bf63094a8903004126c8293d1874ad0565e68a Author: Paul
	Wise <pabs@debian.org> Date:   Sun Sep 6 23:19:46 2009 +0200

2009-09-06  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: ioprio.sort_key() expects keys starting with '?' to
	be at least two character long. It was not the case when different
	threads in the same process had different ionice values, so adjust
	the ionice key in this case.  Bug reported by: Paul Wise <pabs@debian.org>

2009-09-06  Guillaume Chazarain <guichaz@gmail.com>

* iotop/ui.py: Make it even more obvious that something is wrong
	when CONFIG_TASK_DELAY_ACCT is missing

2009-09-06  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Detect python-2.5 before importing incompatible
	stuff

2009-08-30  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Turns out returning a list is faster than
	iterating.

2009-08-30  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Some more minor optimizations

2009-08-30  Guillaume Chazarain <guichaz@gmail.com>

* iotop/data.py: Optimize Stats.__init__ so that Stats.accumulate
	can be cleaned up